d19b4989-78a1-476f-a19a-23e97e29025f20230313040531765naun:naunmdt@crossref.orgMDT DepositInternational Journal of Education and Information Technologies2074-131610.46300/9109http://www.naun.org/cms.action?id=3037224202322420231710.46300/9109.2023.17https://npublications.com/journals/educationinformation/2023.phpRohullahRahmatullahMarmara University, Faculty of Technology, Electrical and Electronics Engineering, Istanbul, TurkeyNecibe Fusun OymanSertellerMarmara University, Faculty of Technology, Electrical and Electronics Engineering, Istanbul, TurkeyVedatTopuzMarmara University, Vocational School of Technical Sciences, Computer Technologies, Istanbul, TurkeyOwing to their robust structure, induction motors are preferred to be used under difficult working conditions. Therefore, various faults may occur in the motor due to unexpected forces during the operations. Obtaining the data through experimental methods by physically creating faults in the induction motors, and analyzing their behavior is not efficient in terms of cost and time for educational purposes. Considering the above negative situation, in this paper, mathematical models have been developed in the dq0 stationary reference frame expressing three-phase stator windings short-circuit fault and broken rotor bar fault in induction motors. The proposed models are faster as compared to the other analytical models in terms of computation due to the rotor position independence of the inductance matrix. The faulty induction motor mathematical models have been implemented in the MATLAB/SIMULINK software environment with detailed explanations of each faulty model’s subsystem. As a visual laboratory that can be used as an educational tool for the analysis of a three-phase faulty induction motor, a graphical user interface application has been developed in MATLAB/GUIDE, which allows users to simulate models from a single interface. As a case study, the behaviors of faulty induction motors in transient and steady states have been simulated in different severity scenarios of the faults. The park vector method has been used as a fault diagnosis approach to investigate fault types and the fault severity effects on the park vector pattern in each fault scenario. In addition, to observe the success of the developed Simulink toolboxes, they were used at Marmara University through courses in electrical machinery and evaluated by the graduated students at the end of the semester.313202331320237202https://npublications.com/journals/educationinformation/2023/a042008-002(2023).pdf10.46300/9109.2023.17.2https://npublications.com/journals/educationinformation/2023/a042008-002(2023).pdf10.1201/9781351172561Saad, N., Irfan, M., & Ibrahim, R. (2018). Condition monitoring and faults diagnosis of induction motors: electrical signature analysis. CRC Press. 10.1109/2943.930988Thomson, W. T., & Fenger, M. (2001). Current signature analysis to detect induction motor faults. IEEE Industry Applications Magazine, 7(4), 26-34. Karmakar, S., Chattopadhyay, S., Mitra, M., & Sengupta, S. (2016). Induction motor fault diagnosis: approach through current signature analysis. Singapore: Springer. 10.1109/tec.2004.837304Siddique, A., Yadava, G. S., & Singh, B. (2005). A review of stator fault monitoring techniques of induction motors. IEEE transactions on energy conversion, 20(1), 106-114. 10.1109/28.148460Bonnett, A. H., & Soukup, G. C. (1992). Cause and analysis of stator and rotor failures in three-phase squirrel-cage induction motors. IEEE Transactions on Industry applications, 28(4), 921-937. 10.1016/j.ymssp.2011.05.007Mehrjou, M. R., Mariun, N., Marhaban, M. H., & Misron, N. (2011). Rotor fault condition monitoring techniques for squirrel-cage induction machine—A review. Mechanical Systems and Signal Processing, 25(8), 2827- 2848. 10.1109/iemdc.2009.5075193Sizov, G. Y., Yeh, C. C., & Demerdash, N. A. (2009, May). Magnetic equivalent circuit modeling of induction machines under stator and rotor fault conditions. In 2009 IEEE International Electric Machines and Drives Conference (pp. 119-124). IEEE. 10.1080/153250001300338763Hur, J., Toliyat, H. A., & Hong, J. P. (2001). Dynamic analysis of linear induction motors using 3-D equivalent magnetic circuit network (EMCN) method. Electric Power Components and Systems, 29(6), 531-541. 10.1109/tec.2006.875471Sudhoff, S. D., Kuhn, B. T., Corzine, K. A., & Branecky, B. T. (2007). Magnetic equivalent circuit modeling of induction motors. IEEE Transactions on Energy Conversion, 22(2), 259-270. 10.1109/tmag.2007.908479Faiz, J., Ebrahimi, B. M., Akin, B., & Toliyat, H. A. (2007). Finite-element transient analysis of induction motors under mixed eccentricity fault. IEEE transactions on magnetics, 44(1), 66-74. 10.2528/pier09052004Vaseghi, B., Takorabet, N., & Meibody-Tabar, F. (2009). Transient finite element analysis of induction machines with stator winding turn fault. Progress In Electromagnetics Research, 95, 1-18. 10.1109/28.370279Luo, X., Liao, Y., Toliyat, H. A., El-Antably, A., & Lipo, T. A. (1995). Multiple coupled circuit modeling of induction machines. IEEE Transactions on industry applications, 31(2), 311-318. 10.1109/iecon.2005.1569140Omar, T., Lahcene, N., Rachild, I., & Maurice, F. (2005, November). Modeling of the induction machine for the diagnosis of rotor defects. Part I. An approach of magnetically coupled multiple circuits. In the 31st Annual Conference of IEEE Industrial Electronics Society, 2005. IECON 2005. (pp. 8-pp). IEEE. OYMAN SERTELLER, N. F., Mergen, A. F., & Gizher, E., (2004). Time harmonic effects for rotor slot design considering deep bar squirrel cage induction motors . 9th International Conference on Optimization of Electrical and Electronic Equipment (pp.141-144). Brasov, Romania 10.1109/tpas.1985.319221Williamson, S., & Mirzoian, K. (1985). Analysis of cage induction motors with stator winding faults. IEEE transactions on power apparatus and systems, (7), 1838- 1842. 10.1109/60.391888Toliyat, H. A., & Lipo, T. A. (1995). Transient analysis of cage induction machines under stator, rotor bar and end ring faults. IEEE Transactions on Energy Conversion, 10(2), 241-247. 10.1109/41.873216Joksimovic, G. M., & Penman, J. (2000). The detection of inter-turn short circuits in the stator windings of operating motors. IEEE Transactions on Industrial Electronics, 47(5), 1078-1084. 10.1109/tie.2006.885133Jung, J. H., & Kwon, B. H. (2006). Corrosion model of a rotor-bar-under-fault progress in induction motors. IEEE Transactions on Industrial Electronics, 53(6), 1829-1841. 10.3390/en13010133Tang, J., Chen, J., Dong, K., Yang, Y., Lv, H., & Liu, Z. (2019). Modeling and evaluation of stator and rotor faults for induction motors. Energies, 13(1), 133. 10.1109/tie.2013.2288191Patel, D. C., & Chandorkar, M. C. (2013). Modeling and analysis of stator interturn fault location effects on induction machines. IEEE transactions on industrial electronics, 61(9), 4552-4564. 10.3390/en11030653Maraaba, L., Al-Hamouz, Z., & Abido, M. (2018). An efficient stator inter-turn fault diagnosis tool for induction motors. Energies, 11(3), 653. 10.1109/tec.2005.847975Cruz, S. M., & Cardoso, A. M. (2005). Multiple reference frames theory: A new method for the diagnosis of stator faults in three-phase induction motors. IEEE Transactions on Energy Conversion, 20(3), 611-619. 10.1002/etep.342Chen, S., & Živanović, R. (2010). Modelling and simulation of stator and rotor fault conditions in induction machines for testing fault diagnostic techniques. European Transactions on Electrical Power, 20(5), 611- 629. 10.1109/pesc.2006.1712154Santos, P. M., Correa, M. B. R., Jacobina, C. B., Da Silva, E. R. C., Lima, A. M. N., Didiery, G., ... & Lubiny, T. (2006, June). A simplified induction machine model to study rotor broken bar effects and for detection. In 2006 37th IEEE Power Electronics Specialists Conference (pp. 1-7). IEEE. 10.1109/asyu50717.2020.9259879Rahmatullah, R., Demir, M. F., & Serteller, N. F. O. (2020, October). Asenkron Motorların DQ Eksende Üç Referans Çerçevesinde Matlab/Simulink ile İncelenmesi. In 2020 Innovations in Intelligent Systems and Applications Conference (ASYU) (pp. 1-6). IEEE. 10.3390/s21144855Terron-Santiago, C., Martinez-Roman, J., PuchePanadero, R., & Sapena-Bano, A. (2021). A Review of Techniques Used for Induction Machine Fault Modelling. Sensors, 21(14), 4855. 10.1109/tie.2003.812471Xianrong Chang, V. Cocquempot and C. Christophe, "A model of asynchronous machines for stator fault detection and isolation," in IEEE Transactions on Industrial Electronics. 50 (2003), 578-584. 10.1109/28.952499Bellini, A., Filippetti, F., Franceschini, G., Tassoni, C., & Kliman, G. B. (2001). Quantitative evaluation of induction motor broken bars by means of electrical signature analysis. IEEE Transactions on industry applications, 37(5), 1248-1255.